
A 1981 Ducati Mike Hailwood Replica is already a piece of racing history. Giving one a ground-up restomod is a bold move. But when owner Glenn brought his MHR to Brisbane’s Ellaspede, he had a clear vision: honour the bike’s heritage while reworking its stance, performance and details for the road. The project began with a question fit for any motorcycle fan: who belongs on a Mount Rushmore of racers? Ellaspede’s picks are Giacomo Agostini, Valentino Rossi, Mick Doohan and Mike “The Bike” Hailwood. There’s no shortage of candidates (or arguments) but Hailwood’s place on that imagined monument made his replica a fitting starting point for a build that aimed to put a fresh stamp on a classic.

The opportunity was a rare one. MHRs don’t often turn up in Australia, and rarer still is an owner who wants to take one in a new direction instead of restoring it to factory condition. Glenn brought a strong design eye and a detailed sense of the lines he wanted the finished bike to achieve. After working through the scope together, he and Ellaspede moved from sketches to Photoshop renders, refining the balance between the broad shape and the smaller details before the spanners came out.

The engine was the first major job. With a complete aesthetic overhaul planned, a thorough mechanical inspection made sense too, so it was removed from the frame and sent west to Vee Two in Western Australia. The name of Brook Henry came up repeatedly in conversations with Ducati specialists, and for good reason: his experience with the marque, and the MHR in particular, stretches back decades. While Vee Two attended to the bevel-drive engine, Ellaspede turned its attention to the chassis and geometry in Brisbane.

Glenn wanted to fit a later-model Ducati 848 front end, bringing more modern suspension and braking to the old Ducati. The conversion presented a tricky problem: aligning the radial-mount calipers with the brake discs while retaining the original Fratelli Pedrini Sarezzo wheels. Replacing those wheels wasn’t on the table. FPS’ sand-cast Italian alloy wheels were made for some of Europe’s most significant marques, including Porsche, BMW and Ducati.

Ellaspede’s usual solution would be to use standard rotors paired with offset caliper brackets secured to the forks. Eventually they bit the bullet and spec’ed up some custom offset floating discs to marry everything up in “beautiful parallel harmony”, and even used the excuse to stamp them with ‘Ellaspede’.

The front-end swap was also a chance to address the MHR’s handling. The original bikes could feel slow to turn and unsettled at speed, so Ellaspede worked through the geometry with input from Henry. The changes are subtle once the bike is assembled, but they’re intended to sharpen corner entry and add stability at speed.

The original tank remains, refurbished, lined and repainted. Behind it, the rear cowl is a hand-formed aluminium piece paired with an end plug modelled in CAD and CNC-machined from ABS plastic. A transparent stop and tail light was considered for the rear, but the team decided it would take the bike too far from its original character.

The electrical system was replaced from end to end, with a custom Motogadget mo.unit setup, key fob and matching analogue gauge. Ellaspede also had a precise position in mind for the headlight, and an off-the-shelf mount wouldn’t get it there. The team designed the mounts in CAD, had them CNC-machined and ceramic-coated to match other details on the bike.

The exhaust came down to a choice between a two-into-one and a two-into-two system. The two-into-one won out, with the bends and transitions shaped around exhaust flow. A Conti muffler, supplied by Ducati enthusiast Lindsay, was modified to sit tight against the bike and leave the rider enough room for their boots. It’s a practical detail, but one that fits the larger aim: keeping the components tucked in and the finished machine visually light.

That compactness helps transform the MHR’s original silhouette, which was considered dated and whale-like by some when it first appeared. The finished bike holds onto recognisable pieces of its past while drawing a cleaner, more contemporary line through the tank, seat and exhaust.

The build also brought a few personal connections into the workshop. Ellaspede contributor Gaven Dall’Osto grew up with Glenn, and the two have shared a long friendship and plenty of rides – including a trip to the Isle of Man TT. Dall’Osto was on hand throughout the project, adding another layer of knowledge to a build already shaped by Glenn’s ideas and Henry’s Ducati expertise.

For Ellaspede, the result is more than a restomod of a rare old Ducati. It’s a chance to reinterpret a significant machine alongside its owner, with the original MHR still at the heart of the design. “We’re incredibly grateful to Glenn for bringing us this bike, and if not already evidenced, it was an absolute pleasure to work on it with him!” say Leo from Ellaspede. “It’s always fun working on bikes, and it’s even more fun working on beautiful old bikes that represent a piece of history close to your heart.”

[ Ellaspede ]