Some motorcycles spend their lives commuting. Others find their calling on the racetrack. This 1967 Honda CB77 Super Hawk has done both, spending years being hauled to race meetings around Australia before disappearing into a garage for close to two decades. Now, with a fresh 350cc heart and a vivid red-and-black finish, it’s ready to make noise again.

Its owner, Richard, bought the Honda on a whim in 2004 after spotting it in the classifieds. The bike had a racing past, but when it arrived at Purpose Built Moto, the years had taken their toll. The CB77 was mounted on a square-tube engine stand. Its wheels and suspension were in boxes, while the rest of the parts sat in dusty tubs labelled simply “Honda”. It was a puzzle, but one with plenty of clues: the bike’s track history gave the build a clear direction.

The first job was sorting through the parts, cleaning what could be saved and assembling a rolling chassis. The front forks had been lengthened and rechromed, while the rear shocks were worn out. Period-correct road-racing replacements proved difficult to find, so the team sourced a set of off-road racing shocks and had Joe at Ride Dynamics bring them back to life. Richard wanted the shocks to lean forward rather than sit perpendicular to the road, so the mounts were modified to suit. With the suspension sorted, the CB77 finally stood on its own two wheels for the first time in 20 years.

The rebuilt wheels pair polished Borrani rims with overhauled brakes. The braking system was stripped, blasted, repaired and polished, then updated with hydraulic actuation and Kustom Tech master cylinders.

Inside the engine, a mix of old and new parts called for a thorough inspection. The 350cc kit was fresh, needing only new rings and a light hone. The head received new valves, guides and springs, along with a full service and resurface. The gearbox was in good shape, but much of the equipment outside the cases had clearly been modified for track use. The ignition system was restored and rebuilt, with a new stator, rotor, regulator-rectifier, starter motor and starter clutch. The chain-driven starter mechanism was upgraded, too.

The engine was vapour blasted in-house, with selected cases and covers polished before assembly. Amal carburettors made way for Mikuni flatslides, fitted with specially made DNA Performance pod filters wearing Purpose Built Moto’s delta motif. It’s a compact, high-revving twin with a simple colour palette: red, black and chrome.

Up front, the cockpit was pared back with restored, steep-angle clip-ons, two-button PBM switches and a small 48mm speedometer. A 4.5-inch Flashpoint LED headlight sits behind a custom sheet-metal cowl, shaped to continue the bike’s flowing lines. The front guard was hand-formed to follow the forks, and the factory Honda Dream fork shrouds were restored and modified to tidy up the front end.

One part of the bike was never up for debate: its fibreglass racing tank. The shape is a defining piece of the CB77’s history, so the team repaired it and made a mounting strap to suit its refreshed appearance. The tired vinyl seat and tail cowl were another matter. Inspired by the tank’s half-moon profile, the new tail breaks the frame line with a side-number-plate shape, then finishes in a neat ducktail. A black leather seat, trimmed by Timeless Autotrim with minimal stitching, keeps the focus on the silhouette.

At the rear, lighting is deliberately spare: a centrally mounted Orbit LED tail light and a PBM tail tidy. The build’s stance is one of its best details. With the suspension and geometry adjusted to echo the original racer, the engine now sits tipped forward slightly. That position also helped make room for a true 2-into-2 exhaust. Sand-bent stainless steel headers run into welded torpedo mufflers, creating a one-piece system on each side that’s designed to sing as the Honda climbs through the rev range.

Custom stainless-steel brackets, cut with PBM’s Arcdroid plasma cutter, support Cognito Moto rearsets. They’ve been positioned to give the rider more room and make use of the extra lean angle created by the raised stance. This is a bike built to be ridden, not merely parked under good light.

Paint was another exercise in restraint. An early design drew on the original tank graphics, but the first response from both painter and owner was, “That’s a lot of red, Tom.” The final scheme keeps the tank and tail in luminous red with black pinstriping, while the front of the bike is blacked out. Sam at Colour Fuel in Sydney laid down the colour and graphics.

The CB72 and CB77 helped change the way the world saw Honda. Before the Super Hawks, the company was best known for pressed-steel commuters. These bikes brought a tubular frame, telescopic forks and a dependable overhead-cam twin into the picture. The 305cc CB77, often regarded as Honda’s first genuine sportbike, could reach 100mph and offered electric starting that worked as promised.

This particular CB77 now carries a 350cc conversion, but its appeal goes beyond the numbers. It’s a nod to the backyard tinkerers and racers who gave these Hondas lives far removed from the daily commute. After nearly 20 years in pieces, this Super Hawk is back where it belongs: on the road, revving hard and getting the attention it deserves.

[ Purpose Built Moto | Photography by Ninefivers ]